Bjærgningskøretøj VOLVO FL250 42 R 4x2 Road-assistance body CO.ME.AR pomoc drogowa laweta эвакуатор

Volvo FL250 42R 4x2 Road-assistance body CO.ME.AR

Expanded rescue and transport platform.

Vehicle description.

1.1 Transport and rescue vehicle - roadside assistance

1.2 CO.ME.AR bodywork.

1.3 Vehicle is used in arctic conditions with low exposure to salty road surface

1.4 Ability to transport two vehicles. One on the platform the second on the eyepiece behind the vehicle

1.5. cabin equipped with pneumatic driver's seat and two passenger seats

2 Vehicle functions:

2.1 Transport on platform. Maximum weight 3825 kg

2.1.1. Platform additionally equipped with hydraulic telescopic for loading low-slung vehicles or vehicles with large overhang (e.g. campers)

2.1.2. space for two dollys under the platform - possibility of pulling cars with blocked wheels

2.2 Transporting the bike on the platform - additional transport handle included

2.3 Towing on the hydraulic eyepiece (possible transport of two vehicles at the same time)

Installed camera gives a real-time overview of the state of the towed vehicle

2.4 Hydraulic upper platform winch

2.4.1 With adjustable transverse position (possibility of pulling vehicles with and/or without twisted wheels onto the platform)

2.4.2 With pneumatic clutch (possibility of fast manual unwinding of the rope) controlled electro-pneumatically from the valve box

2.5 Hydraulic lower frame winch

With pneumatic coupling (enables fast manual unwinding of the rope) controlled pneumatically from the valve box

2.5.2. winch can cooperate with additional guide rolls (installed manually, included) - possibility of transferring force perpendicularly to vehicle axis

Winch may cooperate with hydraulically lifted jib at the rear part of the platform (possibility of lifting vehicles during pulling)

Vehicle start-up - high amperage DC 12/24V connectors located near the batteries

2.7. pneumatic connector for inflating wheels, lifting vehicles on airbags or unlocking air brakes of other vehicles

3 Electrical equipment

3.1 Connector for starting 24 V vehicles

3.2 Connector for starting 12 V vehicles

3.3. trailer connector

3.5 Warning lights with touch panel control

3.5.1. Cab roof LED bar

Upper frame of platform LED bar

Front grille

3.5.4. Rear part of frame

3.6 Work lighting controlled by touch panel

3.6.1. Upper platform frame

3.6.2. Rear part of the frame

3.7 12V cigarette lighter connector powered by built-in 24/12 inverter

4 Remote control functions:

4.1. 24 channels of which 22 are used giving the option of any two additional channels.

4.2 Simultaneous operation of more than one channel - possibility of e.g. simultaneous shifting of the platform and changing its angle or controlling the operation of both winches simultaneously

4.3 Remote activation/deactivation of hydraulics

4.4 Two batteries included

4.5 Remote battery charger, installed in the cab, in the passenger seat

4.6 Emergency stop button function

4.7 Remote audible signal

5 Additional functions

5.1 Locking operation of the levelling system designed to protect the air suspension from damage during loading

5.2 Manual height control of the rear suspension with two pre-programmed settings

5.3 Manual adjustment of engine speed to increase the capacity of the hydraulic system

5.4 Manual activation of particle filter afterburning

5.5 "Clean" mode of operation of the catalytic system

5.6 Axle 2 differential locking

5.7 Locking of traction control system

6 Safety systems

6.1. Parking brake lock when doors are open

Interlock activating the PTO when the engine speed is too high

Interlock to activate PTO if air pressure is too low

Interlock of the PTO activation with gear engaged

6.5 Deactivation of the hydraulic system on the remote control

6.6 Deactivation of the hydraulic system in the distribution box

6.7 Automatic deactivation when the hydraulic system is not used in remote mode. Re-activated by pressing a button on the remote control

6.8 Automatic deactivation of hydraulics in remote mode after loss of confirmation signal from remote control

6.9 Speed limiter set at 90km/h

7 Additional information

7.1 The car is in a good and constant state of exploitation, therefore the odometer at the moment of transaction will be higher than the one in the offer

7.2 The car has a current registration inspection made on 13.10.2021 valid until 17.10.2022

7.3. the car has a current inspection of hydraulic / cargo equipment performed on 24.06.2022 valid until 24.06.2023 completed positively with the following recommendations

7.3.0. The recommendations will be fulfilled on an ongoing basis, and changes to the facts will be notified on the notice when they occur

7.3.1. Recommendation 1 : Use a hook with higher breaking load for the platform winch

7.3.2. Recommendation 2 : Use a hook with higher breaking load for frame hoist

7.3.3. Recommendation 3 : Remove perspiration at the hydraulic coupling of the right arm cylinder under the platform.

7.4 Maintain frequent change of operating fluids e.g. engine oil changed every 6 months.

7.5 The vehicle is equipped with a tachograph.

7.6 Possibility of carrying out initial start-up training.

7.7 Any possible additional documentation - photos/films/certificates available on request.

7.8 Any deviations from the condition described in the advertisement due to the continuous operation of the vehicle will be noted as far as possible.