Ny Nedbygget platform sættevogn Meusburger 1-Achs-Tiefbett-Sattelauflieger

Frame:

Welded steel frame construction with front and rear offsets of the frame and low deck without chamfer at the rear.

Low deck with telescopic central frame, telescopic ca. 4.000 mm, pneumatic locking every 500 mm and with locking for 40ft-container.

Low deck is designed for point loading of 18 tons on 6 m in non-telescopic condition.

Outer frame (U-beam of 6 mm), closed to the outside.

2“-king pin, changeable.

Rear end plate = rear underrun.

Without rail for ramps at the rear.

Axles and tyres:

BPW-axles, axleload 10 tons.

Air suspension with Lifting and lowering device, total stroke 260 mm (-60 / +200 mm), Wabco Smartboard with ECAS function for 2nd fifth wheel load + 100 mm.

S-cam brake 300/200 mm, asbestos-free brake pads, automatic brake adjuster.

5 tyres: 235/75 R 17,5.

Mudguards of metal sheet with mud flaps.

Steering:

Hydraulic forced steering through fifth-wheel coupling.

Electro-hydraulic remote steering with power supply through NATO-socket, with cable remote control.

Braking system:

Two line brakes with EBS.

EBS-braking system (WABCO 4S2M).

Spring controlled parking brake.

Air Connections: red/yellow and Duo-Matic.

Electrical system:

According to law regulations.

24 Volt, 1x 15-pin + 2x 7-pin sockets.

2x 5-chamber-rear lights in the rear plate.

Holder for warning light.

Side marker lights (LED).

Floor:

Floor of glued multilayer plates (ca. 27 mm thick), flush with the outer frame and the longitudinal beams.

12 pairs of lashing rings welded in the outer frame. 8 pairs RUD (8 to) and 4 pairs (4 to).

6 pairs of openings in the lateral outer frame for lashing.

Storage compartment with cover in the floor on the left and the right side.

Drop-sides on the gooseneck:

Bulkhead = steel sheet tool box over the whole width, lateral drop-sides (25 mm) aluminium hollow profiles, height: ca. 400 mm, one-piece, length: ca. 2.000 mm, foldable,.

Pluggable aluminium rear drop-side with pluggable corner post.

Spare wheel holder:

1 spare wheel holder at the bulkhead with gallow.

Painting:

Cleaning with steel pellets and zinc dust priming.

Painting in acryl: Frame and wheel hubs: MB 7350 nova grey. Outer frame: MB 7350 nova grey. Posts on the gooseneck and bulkhead (= steel sheet tool box): MB 7350 nova grey.

Side-drops: anodised.

Rims: silver.

Yellow contour marking on the sides and on the rear.

Additional equipment:

4 wheel chokes with holder.

2 ECE-plates at the rear.

Telescopic warning plates.

Central lubrication system BEKAMAX with pump.

4 pairs of Laxo-sockets 11/63 in the low deck for pluggable Laxo-twist locks (without twist locks) for 1x 20ft-container or 1x 40ft-container.

5 pairs of stanchion pockets (100x50 mm) in the outer frame of the low deck.